期刊目錄列表 - 31~41期(1986-1996) - 第三十九期 (1994)

蠟類對於羰基鐵粉末射出成型製程的影響 作者:許貫中、羅鈞銘、林俊吉(國立臺灣師範大學化學系)

摘要:

本研究在於探討三種蠟,即石蠟(PW)、巴西蠟(CW)、和胺蠟(AW)之特性,以及對於羰基鐵粉╱聚乙烯樹脂(LDPE)系統在射出成型過程中的影響。實驗結果顯示:在混練方面,AW系與CW系之胚體中發現LDPE分子有較明顯的聚集析出的現象。三種蠟系的胚料均屬擬塑性流體;AW或CW系胚料較PW 系,表現的流動性較差、擬塑性較佳。PW系所得的生胚較易產生毛邊。各蠟系在脫脂及燒結後均可得完整表面的胚體,就燒結品的拉伸強度來講,以PW系為最 高,其次依序為CW系、AW系。

關鍵詞:羰基鐵粉、蠟、射出成型

《詳全文》

Journal directory listing - Volume 31-41 (1986-1996) - Volume 39 (1994)

Effects of Waxes on the Injection Molding of Carbonyl Iron Powder Author: K. C. Hsu, G. M, Lo, C. C. Lin(Department of Chemistry, National Taiwan Normal University)

Abstract:

This research is to study the effect of the characteristics of three wax-es, namely paraffin wax(PW), carnauba wax(CW) and acrawax(AW), on the ijection molding of carbonyl iron powder/low-density polyethylene (LDPE) mixtures. The rasults indicate that some LDPE molecules were found easier to be aggregated and separated in the mixture containing ei-ther AW or CW. The feedstocks of all wax systems show pseudoplastic be-havior. Both AW and CW systems appear to exhibit worse fluidity and better pseudoplasticity than the PW system. Burrs might appear in the g-reen parts of the PW system. The specimens of all wax systems, after de-binding and sintering, show good surface appearance, The PW system ex-phibits the highest tensile strength in the resulting sintered parts, followed by CW and AW systems.

Keywords:carbonyl iron powder, wax, injection mloding